|Operating Temperature||-55C to 125C|
|Signal loss||below 0.65dB|
|Frequency||up to 6GHz|
Now we offer 2.4Ghz 5dBi Dipole antennas with RPSMA connectors! Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2x2 MIMO 2.4Ghz AP! By this you can have "2.4Ghz OmniTik", ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.Product specifications
The RB2011 wall mount kit (product code RBWMK) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 indoor cases (models RB2011L-IN, RB2011LS-IN, RB2011UAS-IN and RB2011UAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port.
(* - Only fits self crimped Ethernet cables).
This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.
Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V).
You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported)
The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.
Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet
|Output Voltage||24V 1A|
|Operating Temperature||-35C to +70C|
|Input Voltage||42-57V (Passive, Telecom, 802.3af and 802.3at PoE plus supported)|
High power 24V 1.6A power supply + power plug.
Recommended for long cable runs with several high power wireless cards
|Input Voltage||110/220V 1.2A|
|Output Voltage||24V 1.6A|
|Operating Temperature||-30℃ to +50℃|
5V power injector for USB (RB/411UAHR and RB/493G). IMPORTANT! 5VUSB is just injector cable, 5V power supplies must be sourced locally- we do not sell those.
Accepts DC Plug, 1.1MM x 3.5MM.
Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations.
For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device.
Helps reducing number of wires that lead up the tower.
For using with any RouterBOARD that supports 9-48V PoE.
The GPOE has shielded connectors.
|Input Voltage||9-48V DC|